OUR PRODUCTS
Sodium Silicate
- Alkaline Sodium Silicate
- Neutral Sodium Silicate
Silica Gel
Loose Material according to size
- Silica Gel Indian
- Silica Gel Beads
- Blue Silica Gel
- Banslochan
Colloidal Silica
- Milky White
- Semi Transparent
Tatv Nano-Sil Products.
A comprehensive guide to our Nano Silica-based product offerings.
1. Tatv Nano-Sil 30
This is a SCM which can replace micro silica in the concrete and give better strength of concrete and reduces the cost also. Please check the TDS for the same. Tatv Nano-Sil 30 is a homogeneous colloidal slurry of amorphous nano silica specially made for use in high-quality cementitious concrete mixes. It can give high early strength due to its very high pozzolanic activity when added to cementitious mixes. The new nomenclature is ‘NEC’- Nano Enhanced Concrete, with high strength more cohesive and much lower porosity. It can be used as concrete densifier and surface finisher due to its nano particles.
2. Tatv Nano-Sil 30P
Colloidal Silica can be widely used in the paints industry for saveral purpose.
3. Tatv Grout NS 708
(Colloidal silica based - Solvent-free, low viscosity, hydrophilic grout for rock injection and consolidation of sandy and silty strata.) Tatv Grout NS-708 is a one-component injection system, based on a nanometric colloidal silica. It has good adhesion to wet surfaces. The non-foaming product contains neither solvents nor toxic components.
4. Tatv PlastCon-kure cs32
(High Performance Internal Curing Additive for plaster, masonry & cementitious
Mortars)
Tatv PlastCon-kure cs32 is a high performance, internal curing system for Plastering &
Concrete designed to provide integral curing properties.
5. Tatv Spray-Seal EC28
It is an economical nano silica solution that penetrates into an unsealed cementitious surface to increase density, hardness, and strength of the top layer of a substrate while retaining its breathability.
6. Tatv Densecon EC 32
Tatv Densecon EC 32 is a densifier cum sealer based on Nano Technology to provide reduction in permeability in concrete / plasters and increase the durability and life span of substrate. It densifies the floor and seals the surface.
OTHERS PRODUCTS
A versatile compound used as a binder, adhesive, and sealant in construction, offering excellent durability and water resistance.
A highly reactive silicate solution used for enhancing cement performance, reducing permeability, and improving strength.
A balanced silicate solution used for improving concrete strength and reducing porosity, commonly used in construction.
A desiccant for moisture control, offering superior adsorption for preserving products in dry environments.
Porous beads used as a desiccant to absorb moisture and control humidity, ideal for packaging and storage.
A color-changing desiccant that transitions from blue to pink when saturated, used for indicating moisture levels.
A nanometric silica solution used in industrial applications for improving surface finishes, durability, and strength.
Tatv Nano-Sil is a nanometric silica solution designed to enhance surface finishes, durability, and strength in industrial applications.
Features And Benefits
- Concrete densification and surface finishing
- Self-compacting concrete
- Concrete with extremely high cohesion and resistance to washout
- Reduce the segregation in concrete
- High early strength
- Reduce the porosity of the concrete and makes it more impermeable
- Gives the mix a better resistance against chemical attacks (carbonation, sulphates, and chlorides)
- Increases the lifespan of concrete due to CH and CSH controlled reaction
- For internal curing, colloidal silica will gel immediately and form flocculation, generating a three-dimensional network under an alkaline environment such as cement pore solution
- Slows down the water evaporation rate due to floc network for motion
- Increases development of CH and CSH chemical binding of alkalis into hydrated cement matrix